How to Replace a UPVC Door Replacement Lock
If your door lock is jamming or simply doesn't work as it is supposed to, you should look into replacing it. It may sound complicated however the procedure is simple and does not require a professional locksmith.
A few basic tools, a bit of patience, and lots of care is all you need. Here's how you do it:
Measure the Door
It could be time to replace your uPVC doors if you're having difficulty locking them or they won't close. If you've recently moved into a new home, a tenant left without returning keys, or if your multipoint gearbox is showing signs of wear and tear, replacing the barrel on your lock to an alternative one will give you an additional layer of security.
You'll need to take measurements before buying a new lock. This will ensure that the new cylinder will be a good fit and won't affect your home's security. The backset is the most critical. This is the distance between the center of your keyhole bore hole to the edge of your door. It's usually 2 3/8 or even 2 3/4 inches. Use a measuring tape or ruler to measure this and record the results on paper or a notepad.
It is also important to know what the faceplate thickness is. This is the measurement of the part that covers the mechanism of the lock. If you are able to, purchase an alternative lock from the same manufacturer since they are made to the same dimensions. If you can't find the manufacturer's name or marks on the lock, take a measurement of the width of the cylinder. You can also measure the width of the current cylinder by putting a pencil in the keyhole.
Once you have the measurements you can begin removing the old cylinder. Start by loosening the screw holding the handle in place with a Phillips-head driver. Then, loosen the screws that connect the handles' exterior and interior to one another. After you have removed these screws, you can pull out the barrel screw on the exterior handle to remove the cylinder.
If the cylinder is stuck in the lock, try some WD-40 or another lubricant to help you get it out. It is essential not to try to force it out. Forceful turns can damage the lock's internal gearbox. You might also look into upgrading your lock that has anti-snap and anti bump protection, which is much more robust against attacks from thieves.
Source the Lock
When you are looking to purchase a new door lock, you need to consider a few aspects. To ensure quality and fit ensure you purchase the right sized cylinder from a reputable manufacturer. You'll also need a few basic tools for the job, including tape measure, screwdriver and a rubber mallet.
There are several signs that your upvc door lock is in danger of wearing out and need replacement. The lock could have visible damage or the handle might be loose and doesn't fit properly. If the lock is jamming, or isn't locking, it's time to get a new lock.
Installing the lock correctly is important once you've chosen the correct lock. This will ensure that it is locked and functions properly. Follow the manufacturer's instructions when installing the multipoint lock mechanism in the Upvc panel. Install the correct faceplates, handles and other components. Test the mechanism by locking the door and unlocking it from the inside and outside. After you've completed the work then it's time for celebration.
The process of replacing a door lock made of upvc might sound daunting, but it's a fairly easy DIY task that can be done without needing a locksmith. By recognizing the indicators that your lock is in need for replacement and having all the tools needed it's an easy task.
Keep in mind that just like any other moving component the door lock made of upvc can benefit from some lubrication to run smoothly. A few sprays of graphite powder can prolong their life by preventing excessive friction. Regular cleaning using a damp cloth and WD-40 can also help in keeping your door locks in good condition.
Remove the Cylinder
If you're experiencing issues with your doors made of upvc It could be time to change the barrel on your lock. This is a simple DIY project that can be completed in just a few minutes and is a great way to ensure your home's security. The most important part of this process is to identify the brand of the lock that you currently have to ensure that you find a suitable replacement.
A broken door lock could be a huge hassle, and it can also pose a serious security risk. Locks on uPVC doors are susceptible to malfunction, which is why it's important that you maintain them on a regular basis. Experts suggest changing your lock every seven to eight years. If your lock is undergoing significant damage or you're unhappy with its performance, it's certainly worth considering professional help from an expert.
For uPVC the pin system, referred to as the euro cylinder will be employed in most instances. These are convenient to use and don't break down, but they can still be susceptible to attack. As a result it's a good idea to replace your lock cylinder with one that is more modern and has anti-snap and anti-bump security to stop burglaries.
The first step in changing your uPVC lock is removing the handle and expose the old cylinder. This can be tricky as there are usually some screws hidden beneath the handles, so ensure you have a screwdriver on hand. The next step is to try moving the cylinder until it starts to loosen. When it does, you can remove it from its socket.
Once you've sourced a suitable replacement, it's simply an issue of screwing it in place and then reverse the removal procedure. Do not overtighten double glazed door lock replacement watford www.repairmywindowsanddoors.co.uk as this could cause the cylinder inside the door to get stuck and stop functioning as it should. After everything is back in place you can test the uPVC door replacement lock by opening and closing it both sides. You should be able now to lock and unlock the door with your key. If not, ensure that the screws are tightened, then try again.
Install the Lock
You'll need to do some research first to ensure that the lock you choose is suitable for your door. You'll be required to know the backset and faceplate measurements - that's the distance from the edge of the door to the centre of the cylinder or handle - and the type of lock you choose to ensure the new lock fits properly without harming security.
Once you've finished this, you're now ready to start installing the new lock. It is best to prop the door open, or secure it so that it doesn't close during the installation process. To begin, use a Phillips-head driver to loosen the screws that hold the handle in place. After that then you'll be able to pull the handle's outer and inner parts apart.
You can now begin to take off the old cylinder. This is something you'll need to do by removing it from its barrel. After removing the cylinder, install the new lock. Be sure to follow the directions that correspond to the model you have. Once the lock is in place, you can test it by opening and closing the door from both the inside and the outside, locking and unlocking it from the inside, and then testing it again.
There are a number of reasons why you might need to change the locks on your uPVC door. It might be that you've recently moved in and don't have a key, or that the previous tenant didn't return the key or perhaps you prefer the most secure lock. It shouldn't take more than five minutes to replace the lock cylinder.
Whether your uPVC doors are equipped with single-point or multipoint locks, they all share the same basic mechanism. This means that they could be susceptible to issues occasionally that could result in them not being able to close or getting stuck. These issues can be caused by weather conditions or wear and tear or just the normal use. The majority of these issues can be easily corrected with a little maintenance or by contacting a locksmith.